You are a fisherman and you need to buy some sinkers for your next fishing trip. You don’t know which kind of sinker to buy.
There are many different types of fishing sinkers available and they all look the same. It can be hard to tell which ones are best for your needs.
Sometimes you need to use lead sinkers, sometimes you need steel, and sometimes you need some other kind of sinker.
Use this guide to learn about the different types of fishing sinkers, and learn how to choose the right ones for your needs.
What is Fishing Sinkers
Fishing sinkers, also known as weights or leads, are the most fundamental piece of tackle in the sport.
They are used to add weight to the end of a fishing line so that it can be cast further and sink deeper into the water. Different shapes and sizes of sinkers can be used for different types of fishing.
Split shot and egg sinkers are among the most common types you will find when shopping for supplies. Split shot has a split at one end which allows it to be pinched onto a line without any knots required.
Egg sinkers have an oval shape with holes on each side allowing them to be tied directly onto your line with a knot such as an improved clinch knot or Palomar knot.
Types of Fishing Sinkers
There are so many different types of fishing weights available that it can be difficult to know which one is best for you.
Eggs that stand up to weight without the weight restricting the bait from moving through a hole are an excellent choice for developing a quick chomping maneuver.
The weight has room for the line to move independent of the weight, permitting the fish to trap the breadcrumb along with swimming in a fashion that is nearly answerable for the hook itself.
This works best when you allow the fish to take the line with its mouth. I might actually allow my bail to hang freely when I use vertical pole fishing for catfish.
Then I set up a line graph indicator and wait to see if the line starts progressing.
After a few minutes (count merely to 3 ‘Mississippi), I pick up the rod and give the reel a turn with the pole.
A bullet weight is an elongated cube with a hole through its middle that is most used for fishing bass lures with soft plastics when fishing for trout is difficult or impossible.
If I am fishing with the little bitty enthusiasts and lively threat, I really like using bullet weights.
They can quickly set up, making them a suitable option for anglers. I favor them over egg sinkers, provided they’re fishing rocky areas.
If you plan to position them on the line, poke a toothpick in the top hole and snap off the bottom end. Now you have a fixed position bullet weight. Bullet weights are typically priced from $4 to $15, depending on the materials.
Rubber Core Sinkers
Rubber-core sinkers are excellent for adding extra weight to sink your bait quickly. Imagine an event where you needed to get down to 30 feet quickly because of a hot bite, and all you had were a few sizes of split shots.
Split shots would take quite a while to get to that depth. That’s where rubber-core sinkers come into play.
For fishing tackle that will do in a pinch, they’re a great option. As a reminder, just choose another alternative if you must dig a little deeper in your tackle box. These will typically cost you $4 to $15.
Pyramid sinkers are shaped like pyramids, with the line on top reserved to slide freely in the base of the metal loop. Beneficiary bank anglers are the main target audience for the pyramid weight.
I’ve utilized them when fishing for walleye in lakes and sharks in the Gulf of Mexico, but the sizes differed. When casting these, you cast the weight, not the bait.